// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2020 Martijn Braam * Copyright (c) 2021 Kamil Trzciński */ /dts-v1/; #include #include #include #include #include "rk3399.dtsi" #include "rk3399-opp.dtsi" / { model = "Pine64 PinePhonePro"; compatible = "pine64,pinephone-pro", "rockchip,rk3399"; chassis-type = "handset"; aliases { mmc0 = &sdio0; mmc1 = &sdmmc; mmc2 = &sdhci; }; chosen { bootargs = "earlycon=uart8250,mmio32,0xff1a0000"; stdout-path = "serial2:1500000n8"; }; adc-keys { compatible = "adc-keys"; io-channels = <&saradc 1>; io-channel-names = "buttons"; keyup-threshold-microvolt = <1600000>; poll-interval = <100>; button-up { label = "Volume Up"; linux,code = ; press-threshold-microvolt = <100000>; }; button-down { label = "Volume Down"; linux,code = ; press-threshold-microvolt = <300000>; }; }; bat: battery { compatible = "simple-battery"; voltage-min-design-microvolt = <3400000>; voltage-max-design-microvolt = <4350000>; energy-full-design-microwatt-hours = <11400000>; charge-full-design-microamp-hours = <3000000>; precharge-current-microamp = <120000>; charge-term-current-microamp = <150000>; constant-charge-current-max-microamp = <1500000>; constant-charge-voltage-max-microvolt = <4350000>; factory-internal-resistance-micro-ohms = <150000>; resistance-temp-table = <20 150>; ocv-capacity-celsius = <20>; ocv-capacity-table-0 = <4308000 100>, <4217000 95>, <4161000 90>, <4110000 85>, <4066000 80>, <4007000 75>, <3974000 70>, <3937000 65>, <3896000 60>, <3853000 55>, <3827000 50>, <3807000 45>, <3793000 40>, <3780000 35>, <3768000 30>, <3756000 25>, <3740000 20>, <3716000 15>, <3689000 10>, <3675000 5>, <3400000 0>; }; cluster1_opp_ppp: opp-table1b { compatible = "operating-points-v2"; opp-shared; opp00 { opp-hz = /bits/ 64 <408000000>; opp-microvolt = <800000>; clock-latency-ns = <40000>; }; opp01 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <800000>; }; opp02 { opp-hz = /bits/ 64 <816000000>; opp-microvolt = <825000>; }; opp03 { opp-hz = /bits/ 64 <1008000000>; opp-microvolt = <875000>; }; opp04 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <950000>; }; opp05 { opp-hz = /bits/ 64 <1416000000>; opp-microvolt = <1025000>; }; }; backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm0 0 1000000 0>; pwm-delay-us = <10000>; }; leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&red_led_pin &green_led_pin &blue_led_pin>; led-red { color = ; function = LED_FUNCTION_INDICATOR; gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; }; led-green { color = ; function = LED_FUNCTION_INDICATOR; gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>; }; led-blue { color = ; function = LED_FUNCTION_INDICATOR; gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>; }; }; gpio-key-power { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pwrbtn_pin>; power { debounce-interval = <20>; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "Power"; linux,code = ; wakeup-source; }; }; gpio-key-ri { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&ri_pin>; ring_indicator: ring-indicator { label = "ring-indicator"; linux,can-disable; linux,code = ; gpios = <&gpio0 RK_PA1 GPIO_ACTIVE_LOW>; wakeup-event-action = ; wakeup-source; }; }; // in1 - digital mic daughhterboard // in2 - headset mic // in3 - modem output (muxed with mono) // spol - earphone // hpo - heaphones // lout - modem input // spaker - amp enabled by SPK_CTL_H // // mclk - GPIO4_A0/I2S_CLK rt5640-sound { compatible = "simple-audio-card"; pinctrl-names = "default"; pinctrl-0 = <&hp_det>; simple-audio-card,name = "PinePhonePro"; simple-audio-card,aux-devs = <&speaker_amp>; simple-audio-card,format = "i2s"; simple-audio-card,mclk-fs = <256>; simple-audio-card,hp-det-gpio = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; simple-audio-card,pin-switches = "Internal Speaker"; simple-audio-card,widgets = "Microphone", "Headset Microphone", "Microphone", "Internal Microphone", "Headphone", "Headphones", "Speaker", "Internal Earpiece", "Speaker", "Internal Speaker", "Line", "Line In Modem", "Line", "Line Out Modem"; simple-audio-card,routing = "Headphones", "HPOL", "Headphones", "HPOR", "Internal Earpiece", "SPOLP", "Internal Earpiece", "SPOLN", "Internal Speaker", "Speaker Amp OUTL", "Internal Speaker", "Speaker Amp OUTR", "Speaker Amp INL", "HPOL", "Speaker Amp INR", "HPOR", "DMIC1", "Internal Microphone", "Headset Microphone", "MICBIAS1", "IN2P", "Headset Microphone", "Line Out Modem", "LOUTL", "Line Out Modem", "LOUTR", "IN3P", "Line In Modem", "IN3N", "Line In Modem"; simple-audio-card,cpu { sound-dai = <&i2s0>; }; simple-audio-card,codec { sound-dai = <&rt5640>; }; }; speaker_amp: audio-amplifier { compatible = "simple-audio-amplifier"; pinctrl-names = "default"; pinctrl-0 = <&spk_en>; enable-gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; sound-name-prefix = "Speaker Amp"; }; sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rk818 1>; clock-names = "ext_clock"; pinctrl-names = "default"; pinctrl-0 = <&wifi_enable_h>; post-power-on-delay-ms = <100>; power-off-delay-us = <500000>; /* WL_REG_ON on module */ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; }; vibrator { compatible = "gpio-vibrator"; enable-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>; vcc-supply = <&vcc3v3_sys>; }; /* Power tree */ /* Root power source */ vcc_sysin: vcc-sysin { compatible = "regulator-fixed"; regulator-name = "vcc_sysin"; regulator-always-on; regulator-boot-on; }; vcc5v0_sys: vcc5v0-host-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; regulator-boot-on; vin-supply = <&boost_otg>; regulator-state-mem { regulator-on-in-suspend; }; }; /* * This is not a regulator, but GPIO0_A6 is used to disable * VCC_SYS -> VBAT+ switch that helps boost that power path's * current carrying capacity. * * GPIO0_A6 high: path is disabled no matter what * GPIO0_A6 low: path is enabled if there's 5V voltage on * VBUS_TYPEC * * GPIO0_A6 must be high when the phone is providing VBUS_TYPEC * power. */ vcc5v0_typec: vcc5v0-typec-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_typec_en>; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-name = "vcc5v0_typec"; vin-supply = <&boost_otg>; regulator-state-mem { regulator-on-in-suspend; }; }; /* Main 3.3v supply */ vcc3v3_sys: wifi_bat: vcc3v3-sys { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&vcc_sysin>; regulator-state-mem { regulator-on-in-suspend; }; }; vcc_4g_5v: vcc-4g-5v { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc_4g_5v_en>; regulator-name = "vcc_4g_5v"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&vcc5v0_sys>; regulator-always-on; }; vcc_4g: vcc-4g { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio4 RK_PC7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc_4g_en>; regulator-name = "vcc_4g"; regulator-min-microvolt = <3800000>; regulator-max-microvolt = <3800000>; vin-supply = <&vcc_sysin>; regulator-always-on; }; vcc1v8_codec: vcc1v8-codec-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc1v8_codec_en>; regulator-name = "vcc1v8_codec"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; vin-supply = <&vcc3v3_sys>; }; /* MIPI DSI panel 1.8v supply */ vcc1v8_lcd: vcc1v8-lcd { compatible = "regulator-fixed"; enable-active-high; regulator-name = "vcc1v8_lcd"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; vin-supply = <&vcc3v3_sys>; gpio = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&display_pwren1>; }; /* MIPI DSI panel 2.8v supply */ vcc2v8_lcd: vcc2v8-lcd { compatible = "regulator-fixed"; enable-active-high; regulator-name = "vcc2v8_lcd"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; vin-supply = <&vcc3v3_sys>; gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&display_pwren>; }; vcca1v8_s3: vcc1v8-s3 { compatible = "regulator-fixed"; regulator-name = "vcca1v8_s3"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; vin-supply = <&vcc3v3_sys>; regulator-always-on; regulator-boot-on; }; typec_extcon_bridge: typec-extcon { compatible = "linux,typec-extcon-bridge"; usb-role-switch; orientation-switch; mode-switch; svid = /bits/ 16 <0xff01>; }; sgm3140: led-controller { compatible = "sgmicro,sgm3140"; vin-supply = <&vcc3v3_sys>; pinctrl-names = "default"; pinctrl-0 = <&flash_pins>; enable-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; flash-gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; sgm3140_flash: led { function = LED_FUNCTION_FLASH; color = ; flash-max-timeout-us = <250000>; }; }; }; &cpu_l0 { cpu-supply = <&vdd_cpu_l>; }; &cpu_l1 { cpu-supply = <&vdd_cpu_l>; }; &cpu_l2 { cpu-supply = <&vdd_cpu_l>; }; &cpu_l3 { cpu-supply = <&vdd_cpu_l>; }; &cpu_b0 { cpu-supply = <&vdd_cpu_b>; operating-points-v2 = <&cluster1_opp_ppp>; }; &cpu_b1 { cpu-supply = <&vdd_cpu_b>; operating-points-v2 = <&cluster1_opp_ppp>; }; &cdn_dp { status = "okay"; extcon = <&typec_extcon_bridge>; phys = <&tcphy0_dp>; }; &emmc_phy { status = "okay"; }; &gpu { mali-supply = <&vdd_gpu>; status = "okay"; }; &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <168>; i2c-scl-falling-time-ns = <4>; status = "okay"; rk818: pmic@1c { compatible = "rockchip,rk818"; reg = <0x1c>; interrupt-parent = <&gpio1>; interrupts = ; #clock-cells = <1>; clock-output-names = "xin32k", "rk808-clkout2"; pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>; rockchip,system-power-controller; wakeup-source; vcc1-supply = <&vcc_sysin>; vcc2-supply = <&vcc_sysin>; vcc3-supply = <&vcc_sysin>; vcc4-supply = <&vcc_sysin>; vcc6-supply = <&vcc_sysin>; vcc7-supply = <&vcc3v3_sys>; vcc8-supply = <&vcc_sysin>; vcc9-supply = <&vcc3v3_sys>; usb-supply = <&vcc5v0_typec>; regulators { vdd_cpu_l: DCDC_REG1 { regulator-name = "vdd_cpu_l"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <750000>; regulator-max-microvolt = <1350000>; regulator-ramp-delay = <6001>; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_center: DCDC_REG2 { regulator-name = "vdd_center"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1350000>; regulator-ramp-delay = <6001>; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_ddr: DCDC_REG3 { regulator-name = "vcc_ddr"; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; }; }; vcc_1v8: vcc_wl: DCDC_REG4 { regulator-name = "vcc_1v8"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; }; }; vcca3v0_codec: LDO_REG1 { regulator-name = "vcca3v0_codec"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-state-mem { regulator-off-in-suspend; }; }; vcc3v0_touch: LDO_REG2 { regulator-name = "vcc3v0_touch"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-state-mem { regulator-off-in-suspend; }; }; vcca1v8_codec: LDO_REG3 { regulator-name = "vcca1v8_codec"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_power_on: LDO_REG4 { regulator-name = "vcc_power_on"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3300000>; }; }; vcc_3v0: LDO_REG5 { regulator-name = "vcc_3v0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3000000>; }; }; vcc_1v5: LDO_REG6 { regulator-name = "vcc_1v5"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1500000>; }; }; vcc1v8_dvp: LDO_REG7 { regulator-name = "vcc1v8_dvp"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-off-in-suspend; }; }; vcc3v3_s3: LDO_REG8 { regulator-name = "vcc3v3_s3"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-off-in-suspend; }; }; vccio_sd: LDO_REG9 { regulator-name = "vccio_sd"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3300000>; }; }; vcc3v3_s0: SWITCH_REG { regulator-name = "vcc3v3_s0"; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; }; }; boost_otg: DCDC_BOOST { regulator-name = "boost_otg"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <5000000>; }; }; otg_switch: OTG_SWITCH { regulator-name = "otg_switch"; }; }; /* * XXX: Backported BSP stuff, drop this. Use standard * "monitored-battery" property. */ battery { compatible = "rockchip,rk818-battery"; ocv_table = <3400 3675 3689 3716 3740 3756 3768 3780 3793 3807 3827 3853 3896 3937 3974 4007 4066 4110 4161 4217 4308>; design_capacity = <2916>; design_qmax = <2708>; bat_res = <150>; max_input_current = <3000>; max_chrg_current = <2000>; max_chrg_voltage = <4350>; sleep_enter_current = <300>; sleep_exit_current = <300>; power_off_thresd = <3400>; zero_algorithm_vol = <3950>; fb_temperature = <105>; sample_res = <10>; max_soc_offset = <60>; energy_mode = <0>; monitor_sec = <5>; virtual_power = <0>; power_dc2otg = <0>; otg5v_suspend_enable = <1>; }; charger { compatible = "rockchip,rk818-charger"; power-supplies = <&fusb0>; monitored-battery = <&bat>; }; }; vdd_cpu_b: regulator@40 { compatible = "silergy,syr827"; reg = <0x40>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; pinctrl-0 = <&vsel1_pin>; regulator-name = "vdd_cpu_b"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_gpu: regulator@41 { compatible = "silergy,syr828"; reg = <0x41>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; pinctrl-0 = <&vsel2_pin>; regulator-name = "vdd_gpu"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; }; /* * Cameras: * * cif clk out = gpio2 B3 / CIF_CLKOUTA_u * * both on i2c1 GPIO4_A1 (SDA) / GPIO4_A2 (SCL) * * both share power: * VCC1V8_DVP - LDO7 - supplied by VCC7 (VCC3V3_SYS) * DVDD_DVP 1.5V - autoenabled by VCC2V8_DVP depends on VCC1V8_S3 (U118 supplies 1.2V, though, not 1.5V) * VCC2V8_DVP af - autoenabled by VCC1V8_DVP depends on VCC3V3_SYS * AVDD2V8_DVP - autoenabled by VCC1V8_DVP depends on VCC3V3_SYS * * mipi0 = imx258 * reset = gpio1 A0 * powerdown = GPIO2_B4 * * mipi1 = OV5640 * powerdown = GPIO2_D4 * * bt656-supply = <&vcc1v8_dvp>; */ &i2c1 { status = "okay"; clock-frequency = <400000>; i2c-scl-rising-time-ns = <300>; i2c-scl-falling-time-ns = <15>; pinctrl-0 = <&i2c1_xfer &cif_clkouta>; assigned-clocks = <&cru SCLK_CIF_OUT &cru SCLK_CIF_OUT_SRC>; assigned-clock-parents = <&cru SCLK_CIF_OUT_SRC &cru PLL_GPLL>; assigned-clock-rates = <19200000 0>; /* Rear-facing camera */ wcam: camera@1a { compatible = "sony,imx258"; reg = <0x1a>; pinctrl-names = "default"; pinctrl-0 = <&wcam_rst &wcam_pdn>; clocks = <&cru SCLK_CIF_OUT>; clock-names = "xvclk"; vif-supply = <&vcc1v8_dvp>; /*XXX: also depends on vcca1v8_codec for I2C bus power */ reset-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_LOW>; powerdown-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; rotation = <180>; port { wcam_out: endpoint { remote-endpoint = <&mipi_in_wcam>; data-lanes = <1 2 3 4>; link-frequencies = /bits/ 64 <320000000>; //link-frequencies = /bits/ 64 <633600000>; }; }; }; // XXX: modem codec supplies: // - vcc1v8_codec // - vcca3v0_codec // supplies: (always on currently) // - vcca3v0_codec // - vcca1v8_codec // - vcc5v0_sys - spk_vcc rt5640: rt5640@1c { compatible = "realtek,rt5640"; reg = <0x1c>; clocks = <&cru SCLK_I2S_8CH_OUT>; clock-names = "mclk"; realtek,dmic1-data-pin = <1>; realtek,in3-differential; #sound-dai-cells = <0>; }; }; &i2c3 { i2c-scl-rising-time-ns = <450>; i2c-scl-falling-time-ns = <15>; status = "okay"; touchscreen@14 { compatible = "goodix,gt917s"; reg = <0x14>; interrupt-parent = <&gpio3>; interrupts = ; use-dt-irq-flags; irq-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>; AVDD28-supply = <&vcc3v0_touch>; VDDIO-supply = <&vcc3v0_touch>; touchscreen-size-x = <720>; touchscreen-size-y = <1440>; poweroff-in-suspend; }; light-sensor@48 { compatible = "sensortek,stk3311"; reg = <0x48>; interrupt-parent = <&gpio4>; interrupts = ; vdd-supply = <&vcc_3v0>; leda-supply = <&vcc_3v0>; }; }; &i2c4 { i2c-scl-rising-time-ns = <600>; i2c-scl-falling-time-ns = <20>; status = "okay"; fusb0: typec-portc@22 { compatible = "fcs,fusb302"; reg = <0x22>; interrupt-parent = <&gpio1>; interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&fusb0_int>; extcon = <&typec_extcon_bridge>; usb-role-switch = <&typec_extcon_bridge>; vbus-supply = <&otg_switch>; connector { compatible = "usb-c-connector"; data-role = "dual"; label = "USB-C"; op-sink-microwatt = <2500000>; power-role = "dual"; sink-pdos = ; source-pdos = ; try-power-role = "sink"; mode-switch = <&typec_extcon_bridge>; orientation-switch = <&typec_extcon_bridge>; altmodes { dp { svid = <0xff01>; vdo = <0x0c0046>; }; }; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; usbc_hs: endpoint { remote-endpoint = <&u2phy0_typec_hs>; }; }; port@1 { reg = <1>; usbc_ss: endpoint { remote-endpoint = <&tcphy0_typec_ss>; }; }; port@2 { reg = <2>; usbc_dp: endpoint { remote-endpoint = <&tcphy0_typec_dp>; }; }; }; }; }; accelerometer@68 { compatible = "invensense,mpu6500"; reg = <0x68>; interrupt-parent = <&gpio1>; interrupts = ; vdd-supply = <&vcc_1v8>; vddio-supply = <&vcc_1v8>; mount-matrix = "1", "0", "0", "0", "-1", "0", "0", "0", "1"; }; lis3mdl: magnetometer@1c { compatible = "st,lis3mdl-magn"; reg = <0x1c>; interrupt-parent = <&gpio1>; interrupts = ; vdd-supply = <&vcc3v3_sys>; vddio-supply = <&vcc_1v8>; status = "disabled"; }; // not populated currently ak09911: compass@c { compatible = "asahi-kasei,ak09911"; reg = <0x0c>; interrupt-parent = <&gpio1>; interrupts = ; vdd-supply = <&vcc_3v0>; vid-supply = <&vcc_1v8>; status = "disabled"; }; }; &i2s0 { rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; pinctrl-0 = <&i2s0_2ch_bus>; status = "okay"; }; &io_domains { status = "okay"; bt656-supply = <&vcc1v8_dvp>; audio-supply = <&vcca1v8_codec>; sdmmc-supply = <&vccio_sd>; gpio1830-supply = <&vcc_3v0>; }; &isp0 { status = "okay"; ports { port@0 { mipi_in_wcam: endpoint@0 { reg = <0>; remote-endpoint = <&wcam_out>; data-lanes = <1 2 3 4>; }; }; }; }; &mipi_dphy_rx0 { status = "okay"; }; &isp0_mmu { status = "okay"; }; &mipi_dsi { status = "okay"; clock-master; ports { mipi_out: port@1 { #address-cells = <0>; #size-cells = <0>; reg = <1>; mipi_out_panel: endpoint { remote-endpoint = <&mipi_in_panel>; }; }; }; panel@0 { compatible = "hannstar,hsd060bhw4"; reg = <0>; backlight = <&backlight>; reset-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_LOW>; vcc-supply = <&vcc2v8_lcd>; // 2v8 iovcc-supply = <&vcc1v8_lcd>; // 1v8 pinctrl-names = "default"; pinctrl-0 = <&display_rst_l>; port { mipi_in_panel: endpoint { remote-endpoint = <&mipi_out_panel>; }; }; }; }; &uart3 { status = "okay"; }; &pmu_io_domains { pmu1830-supply = <&vcc_1v8>; status = "okay"; }; &pinctrl { bt { bt_enable_h: bt-enable-h { rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; }; bt_host_wake_l: bt-host-wake-l { rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>; }; bt_wake_l: bt-wake-l { rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; buttons { pwrbtn_pin: pwrbtn-pin { rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; camera { wcam_rst: wcam-rst { rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; }; wcam_pdn: wcam-pdn { rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; fusb302x { fusb0_int: fusb0-int { rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; }; }; leds { red_led_pin: red-led-pin { rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; green_led_pin: green-led-pin { rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; }; blue_led_pin: blue-led-pin { rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; }; flash_pins: flash-pins { rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>, <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; modem { ri_pin: ri-pin { rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; }; vcc_4g_5v_en: vcc-4g-5v-en-pin { rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; }; vcc_4g_en: vcc-4g-en-pin { rockchip,pins = <4 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { pmic_int_l: pmic-int-l { rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; vsel1_pin: vsel1-pin { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; }; vsel2_pin: vsel2-pin { rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; }; sdcard { sdmmc0_pwr_h: sdmmc0-pwr-h { rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sdio-pwrseq { wifi_enable_h: wifi-enable-h { rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb-typec { vcc5v0_typec_en: vcc5v0_typec_en { rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; }; }; dsi { display_rst_l: display-rst-l { rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_down>; }; display_pwren: display-pwren { rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_down>; }; display_pwren1: display-pwren1 { rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_down>; }; }; sound { vcc1v8_codec_en: vcc1v8-codec-en { rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>; }; hp_det: hp-det { rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; spk_en: spk-en { rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; &pwm0 { status = "okay"; }; &pwm2 { status = "okay"; }; &saradc { vref-supply = <&vcca1v8_s3>; status = "okay"; }; &sdio0 { bus-width = <4>; cap-sd-highspeed; cap-sdio-irq; disable-wp; keep-power-in-suspend; mmc-pwrseq = <&sdio_pwrseq>; non-removable; pinctrl-names = "default"; pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; sd-uhs-sdr104; status = "okay"; }; &sdmmc { bus-width = <4>; cap-sd-highspeed; cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; disable-wp; max-frequency = <150000000>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; vmmc-supply = <&vcc3v3_sys>; vqmmc-supply = <&vccio_sd>; status = "okay"; }; &sdhci { bus-width = <8>; mmc-hs200-1_8v; non-removable; status = "okay"; }; &spi1 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; }; }; &tcphy0 { extcon = <&typec_extcon_bridge>; status = "okay"; }; &tcphy0_dp { port { tcphy0_typec_dp: endpoint { remote-endpoint = <&usbc_dp>; }; }; }; &tcphy0_usb3 { port { tcphy0_typec_ss: endpoint { remote-endpoint = <&usbc_ss>; }; }; }; &tsadc { /* tshut mode 0:CRU 1:GPIO */ rockchip,hw-tshut-mode = <1>; /* tshut polarity 0:LOW 1:HIGH */ rockchip,hw-tshut-polarity = <1>; status = "okay"; }; &u2phy0 { status = "okay"; extcon = <&typec_extcon_bridge>; port { u2phy0_typec_hs: endpoint { remote-endpoint = <&usbc_hs>; }; }; }; &u2phy0_otg { status = "okay"; }; &u2phy0_host { status = "okay"; phy-supply = <&vcc5v0_sys>; }; &u2phy1 { status = "okay"; }; &u2phy1_host { status = "okay"; phy-supply = <&vcc5v0_sys>; }; &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; uart-has-rtscts; status = "okay"; bluetooth { compatible = "brcm,bcm4345c5"; clocks = <&rk818 1>; clock-names = "lpo"; device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; max-speed = <1500000>; pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; vbat-supply = <&wifi_bat>; vddio-supply = <&vcc_wl>; }; }; &uart2 { status = "okay"; }; &usb_host0_ehci { status = "okay"; }; &usb_host0_ohci { status = "okay"; }; &usb_host1_ehci { status = "okay"; }; &usb_host1_ohci { status = "okay"; }; &usbdrd3_0 { status = "okay"; }; &usbdrd_dwc3_0 { dr_mode = "otg"; extcon = <&typec_extcon_bridge>; status = "okay"; }; &vopb { status = "okay"; assigned-clocks = <&cru DCLK_VOP0_DIV>, <&cru DCLK_VOP0>, <&cru ACLK_VOP0>, <&cru HCLK_VOP0>; assigned-clock-rates = <0>, <0>, <400000000>, <100000000>; assigned-clock-parents = <&cru PLL_CPLL>, <&cru DCLK_VOP0_FRAC>; }; &vopb_mmu { status = "okay"; }; &vopl { status = "okay"; assigned-clocks = <&cru DCLK_VOP1_DIV>, <&cru DCLK_VOP1>, <&cru ACLK_VOP1>, <&cru HCLK_VOP1>; assigned-clock-rates = <0>, <0>, <400000000>, <100000000>; assigned-clock-parents = <&cru PLL_CPLL>, <&cru DCLK_VOP1_FRAC>; }; &vopl_mmu { status = "okay"; };